| ||||
EZ Aura Wax®
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
![]()
CHIPS™ Dipping Waxes are scientifically compounded discs, 3/8" diameter x .040" thick (9.5mm x 1.05mm), that are extremely tough, capable of precise carving yet will resist warping and fracture.
Especially developed for electronic dipping units, CHIPS™ can also be used successfully in most dipping pots. They have an optimum working range of 190°F -225°F (88°C-107°C) within which (HIPS will produce a uniform thickness which can be varied depending upon length of time the die is dipped. A single dip will produce a perfectly precise coping to the die that is elastic and strongly resistant to crushing.
CHIPS™ will retain its superior characteristics for up to a month in the unit well without change.
|
|
|
![]()
EZ Sticky Utility WaxesDENTIFAX offers four utility waxes to complete the El Aura Wax" product line: a white diagnostic wax; a yellow blockout wax and two margin waxes. The EZ Aura Blockout Wax has excellent adhesion characteristics and will not be affected or distort when other waxes are applied over it. The El Aura Margin Waxes are smooth, soft and may be carved for knife-edge margin finishing. Makes an ideal first layer for waxing inlays and onlays. EZ Sticky Aura Waxes are available in disc, bar, rod, or stick form in three colors. These waxes set quickly to create a fast, rigid bond between two wax surfaces. Ideally suited for crown, bridgework or attachment of patterns to sprue assemblies. Does not hinder melt-out and burn-out cleanly. |
|
![]()
EZ Aura Wire Wax SpoolsDENTIFAX Wire Waxes are pliable-and perfectly suited for producing lingual bars and retentions. These wire waxes are strong and flexible enough to be twisted or bent to conform to any shape without cracking or breaking. Available on economical 1/21b spools in a wide variety of gauges and colors. |
|
|
|||||||||||||||
![]()
EZ Sticky Aura Wax®EZ Sticky Aura Waxes are available in disc, bar, rod or slick form in three colors. These waxes set quickly to create a fast, rigid bond between two wax surfaces. Ideally suited for crown, bridgework or attachment of patterns to sprue assemblies. Does not hinder melt-out and burn-out cleanly. |
|
|
![]()
DENTIFAX offers a variety of EZ Aura Carving Waxes that are excellent for fabricating all types of patterns, crowns, bridges or inlays. These waxes are available in disc or bar form, three hardness grades and four colors.
|
|
|
![]()
EZ A-Tachy™ Aura Wax®EZ A-Tachy™ Aura Wax® is cranberry colored and has been developed to improve and simplify the attachment of wax. Its tacky composition makes it more effective than sticky wax or other waxes generally used for spruing. The wax speeds up the entire procedure facilitating the spruing of all wax-ups, copings, crowns, tics, inlays and partial denture wax frameworks. Attaches easily minimal distortion and flows smoothly. will not break or Chip. Catalog No. T9120 - Cranberry 2oz. tin (56gm) |
|
|
Terms and Conditions of Use | Privacy Statement | WebDesign ©2009 Kentropolis Web Site Development & Design |